Freightliner FLD Conventional — FLD Conventional

Cab Appearance Cab Washing and Polishing Care of Chrome Parts To protect the finish of your new vehicle, follow these guidelines carefully: To prevent rust, keep chrome parts clean and pro- tected at all times. This is especially important during winter driving and in coastal areas where there is exposure to salt air. During the first 30 days, rinse your vehicle fre- quently with water. If the vehicle is dirty, use a mild liquid soap. Do not use detergent. During the first 30 days, do not use anything abrasive on your vehicle. Brushes, chemicals, and cleaners may scratch the finish. When cleaning chrome parts, use clean water and a soft cloth or sponge. A mild detergent may also be used.

During the first 120 days, do not wax your vehicle. Sponge gently, then rinse. If necessary, use a non- abrasive chrome cleaner to remove stubborn rust or other material. Do not use steel wool. To help protect the chrome after cleaning, apply a coat of polishing wax to the surface. Never use wax on parts that are exposed to high heat, such as ex- haust pipes. To extend the life of your vehicle’s finish, follow these guidelines: Avoid washing your vehicle in the hot sun. Always use water. After the cab is completely washed, dry it with a towel or chamois. Dashboard Care Do not dust painted surfaces with a dry cloth, as this will scratch the paint.

Periodically wipe the dashboard with a water- dampened cloth. A mild detergent can be used, but avoid using strong detergents. Do not remove ice or snow from a painted sur- face with a scraper of any sort. To prevent damage to the finish, wax it regu- larly. Before waxing, if the finish has become dull, remove oxidized paint using a cleaner specifically designed for this purpose. Remove all road tar and tree sap before waxing. Freightliner recommends that a quality brand of cleaner or cleaner-polish and polishing wax be used. CAUTION Do not use Armor-All Protectant ® , STP Son-of-a- Gun ® , or other equivalent treatments.

These cleaners contain vinyl plasticizers that can cause stress crazing in the interior plastic panels, which can result in cracking of the panels. Vinyl Upholstery Cleaning Do not let diesel fuel or antifreeze stand on a painted surface. If either should occur, rinse the surface off with water. To prevent soiling, frequent vacuuming or light brush- ing to remove dust and dirt is recommended. Harsh cleaning agents can cause permanent damage to vinyl upholstery. To preserve the upholstery and pre- vent damage, carefully review the following sections for recommended cleaning procedures. Waxing or refinishing improves soil resistance and cleanability for all vinyls.

Any hard wax, such as that used on automobiles, may be used. To prevent rust, have any nicks or other dam- age on the finish touched up as soon as pos- sible. Park your vehicle in a sheltered area whenever possible. Care of Fiberglass Parts Ordinary Dirt Wash unpainted fiberglass air fairings and shields monthly with a mild detergent, such as dishwashing liquid. Avoid strong alkaline cleansers. Wash the upholstery with warm water and mild soap, such as saddle or oil soap. Apply soapy water to a large area and allow to soak for a few minutes, then rub briskly with a cloth to remove the dirt. This can be repeated several times, as necessary. Apply a wax specifically designed for fiberglass. 12.1