OPERATION EXPLANATION OF COMPONENTS 7. DISPLAY The reception band, frequency, preset number, and time are dis- played. 8. TIME CORRECTION BUTTON This is used to correct the time. H : Hour M : Minute SET: Sets to start of hour (00 minutes) 9. STEREO INDICATOR (ST) This lamp lights up when a stereo broadcasting is picked up when receiving an FM broadcasting station. METHOD OF OPERATION METHOD OF SETTING PRESET BUTTONS 1. Press power switch (1)and display the frequency on display (7). 2. Turn the tuning button (manual, auto) to adjust to the desired frequency. 3. Select a preset button to use for recording the frequency set- ting, and keep that button pressed for at least 1.5 seconds.
The sound will disappear, but when the setting is recorded, the sound will appear and the preset number will appear on display (7) to show that the station has been preset. After completion of presetting, press preset button (6), and release it within approx. 1.5 seconds. The setting will change to the frequency of the broadcasting station recorded for that button. One AM station and one FM station can be recorded for each preset button. 97