1 page 1 Models J08C-TP and J08C-TR 3-11-2 ENGINE REMOVAL OF COMPONENT PARTS REMOVE THE COOLING FAN AND FAN CLUTCH NOTE: Refer to page 3-5-3. REMOVE THE THERMOSTAT CASE NOTE: Refer to page 3-5-4. REMOVE THE COOLANT PUMP NOTE: Refer to page 3-5-4. 1 2 3 4 5 THERMOSTAT 1. Thermostat case cover 2. O-ring 3. Thermostat case 4. Thermostat 5. Gasket 1 SM3-J284 Fig. 3 THERMOSTAT DISASSEMBLING 1. Remove the three mounting bolts from the thermo- stat case cover, then remove the thermostat case cover from the thermostat case. 2. Remove the thermostat from the thermostat case. SM3-J706 Fig. 4 INSPECTION AND REPAIR 1.
Check the thermostat mounting surface of thermo- stat case for deterioration or damage visually. If the damage or wear is excessive, replace the thermo- stat case with a new one. SM3-J707 Fig. 5