1 page 1 Models J08C-TP and J08C-TR ENGINE 3-13-9 MOUNTING 1. EXHAUST PIPE AND MUFFLER 1. Connect the exhaust pipe and muffler. NOTE : Removal and installation should be done com- pletely. WARNING If the position of the tail pipe is incorrect, exhaust fumes may blow onto passers by and burns may also result. SM3-J735 Fig. 16 2. Connect the exhaust pipe to the exhaust manifold. NOTE: G Replace the gasket with new one. G The mounting portion of the exhaust manifold is subjected to heat and is likely to come loose, so spe- cial nuts are employed. Be sure to use the correct nuts. G When tightening the clamp, arrow mark on the clamp or rounded part must direct upward. G Tightening torque:
M8 ··········· T = 222-226 kg·cm (16.0-16.3 lb·ft) M10 ········· T = 515-525 kg·cm (37.2-38.0 lb·ft) SM3-J601A Fig. 17