Komatsu — SETTING THE PRESET BUTTONS

OPERATION LISTENING TO THE RADIO 1. Turn the starting switch ON, then turn radio power (1) ON. 2. BAND button (2) is used to select AM or FM. 3. Use the preset switch or tuning switch (3) to select the station. 4. Adjust the volume and tone as desired. 5. To turn the radio OFF, turn VOL knob (1) to the left until a click is heard. 6. Turn the ignition key to the ACC or ON position. 7. Turn the radio power (1) ON. AUTOMATIC TUNING When the SEEK button is pressed, it moves up to higher frequencies and when it finds a station that can be received, it stops automatically.

MANUAL TUNING When the TUNE button U is pressed, the frequency goes up; when the V button is pressed, the frequency goes down. If it is kept pressed, the frequency changes continuously. SETTING THE PRESET BUTTONS 1. Select the desired preset station. Use the BAND button to select AM or FM, and use the TUNE button to select the frequency of the broadcasting station. 2. Decide the number of the button to be preset, and keep it pressed for 2 seconds. The number of the button will be displayed and the presetting is completed. 3. Repeat Steps 1 - 2 to preset other broadcasting stations. To change the setting of a preset switch to another station, repeat Steps 1 - 2.

If the battery is replaced or the power is switched off, all the preset settings are deleted. Perform the presetting operation again. It is possible to preset 6 AM stations and 6 FM stations. WA480-5L 2-47