OPERATION THEFT PROTECTION To set the theft feature, switch the unit on, a code appears on the display (18) and then four zeros 0000 A. Press station button 1 (16) repeatedly until the first number of your code appears on the display (18) B. Press station button 2 (16) repeatedly until the second number of your code appears on the display (18). C. Press station button 3 (16) repeatedly until the third number of your code appears on the display (18) D. Press station button 4 (16) repeatedly until the fourth number of your code appears on the display (18) E.
Once the correct code is displayed, press the button (14) PRECAUTIONS WHEN USING Stow the antenna when traveling in places with low overhead clearance. To ensure safety, always keep the sound to a level where it is possible to hear outside sounds during operation. If water gets into the speaker case or radio, it may lead to an unexpected failure, so be careful not to get water on the equipment. Do not wipe the scales or buttons with benzene, thinner, or any other solvent. Wipe with a soft dry cloth. Use a cloth soaked in alcohol if the equipment is extremely dirty. 2-54 WA480-5L