OPERATION SECURITY AND LOCKS This machine is equipped with several security, locks and safety features designed to protect the operator, persons performing service, repair or inspections on the machine as well as the general public when the machine is not in use and unattended. It is important for the operator of the machine to know where these features are located and when to use them. Failure to do so may result in damage to the machine or injury to personnel. IGNITION KEY LOCKED AREAS These areas require the ignition key to lock and secure them. Whenever you leave the machine unattended for any length of time it is advised to lock and secure the machine safely.
Doing so will prevent unauthorized personnel from accessing the machine. CAB DOOR LOCKS Both cab doors are equipped with a key lock. Locking the cab prevents access to the machine operating controls. ENGINE ACCESS DOORS Both sides of the engine access doors right and left are set up with a security lock to prevent unauthorized access. Always keep these doors locked to avoid the possibility of vandalism. 2-66 WA480-5L