OPERATION MACHINE FEATURES These features are important for the operator to know about. Although not safety related these features offer operator comfort and convenience as well as easy care for the machine. CAB DOORS OPEN LOCK When getting in or out of the operator's compartment, or when operating with the door open, use this lock to hold the door in position. 1. Push the door against the catch (1) to set it in position. 2. When setting the door in position, attach it firmly to the catch. 3. When getting on or off the machine, hold the handrail on the inside. 4. When closing the door from the operator's seat, push lever (2) up to release the latch. 5.
When closing the door after getting of the machine, push lever (3) down to release the latch. ELECTRICAL FUSE The fuses protect the electrical equipment and wiring from burning out. If the fuse becomes corroded, or white powder can be seen, or the fuse is loose in the fuse holder, replace the fuse. Replace the fuse with another of the same capacity. Loosen the knob (1) at two places, then remove cover (2). The fuse boxes are A and B . 2-72 WA480-5L