Komatsu — LIFT ARM LEVER

OPERATION STARTING YOUR WORK OPERATIONS Do not start the engine if warning tags have been attached to the steering wheel or control levers. Sound your horn to warn others in the area before starting the engine or moving the machine. Operate the machine in a seated position only, with the seat belt fastened snugly around your waist. Do not allow anyone in the cab or on the machine during operations. Check the area to be sure all personnel are clear of the machine and your work area. WORK EQUIPMENT 1. Lift arm control lever (1) and bucket control lever (2) can be used to operate the lift arm and bucket as follows. LIFT ARM LEVER Position (a): RAISE Position (b):

HOLD The lift arm is kept in the same position. Position (c): LOWER Position (d): FLOAT The lift arm moves freely under external force. When the lift arm control lever is pulled further from the raise position, the lever is stopped in this position until the lift arm reaches the preset kick-out position, and the lever is return to the hold position. Remark Do not use the FLOAT position when lowering the lift arm. Use the FLOAT position when leveling in reverse direction only. 2-102 WA480-5L