Komatsu — ELECTRICAL SYSTEM

MAINTENANCE SYSTEMS TROUBLESHOOTING CHARTS ELECTRICAL SYSTEM ( ): Always contact your Komatsu distributor when dealing with these items. In cases of abnormalities or causes which are not listed below, please contact your Komatsu distributor for repairs. WA480-5L 3-5 Problem Main causes Remedy Lamp does not glow brightly even when the engine runs at high speed Lamp flickers while engine is running Defective wiring Defective adjustment of belt tension. (• Check, repair loose terminals, dis- connections) Adjust alternator belt tension For details, see “EVERY 250 HOURS SERVICE” on page 3-45.

Even when the engine is rotating, the charge caution pilot lamp does not go out Defective alternator Defective wiring Defective adjustment of alternator belt tension (• Replace) (• Check, repair) Adjust alternator belt tension For details, see “EVERY 250 HOURS SERVICE” on page 3-45 Abnormal noise is generated from alternator Defective alternator (• Replace) Starting motor does not turn when starting switch is turned to ON Defective wiring Insufficient battery charge (• Check, repair) Charge Pinion of starting motor keeps going in and out Insufficient battery charge •Charge Starting motor turns engine sluggishly Insufficient battery charge Defective starting motor Charge (• Replace) Starting motor disengages before engine starts Defective wiring Insufficient battery charge (• Check, repair) Charge Preheating pilot lamp does not light up Defective wiring Defective glow relay, glow controller, water temperature sensor Defective preheating pilot lamp (• Check, repair) (• Replace) (• Replace) Even when engine is stopped, charge caution pilot lamp does not light up (starting switch at ON position) Defective wiring Defective monitor (• Check, repair) (• Replace)