Komatsu — PROPER SELECTION OF FUEL, COOLANT AND LUBRICANTS

MAINTENANCE The engine mounted on this machine employs electronic control and a high-pressure fuel injection device to obtain good fuel consumption and good exhaust gas characteristics. For this reason, it requires high precision for the parts and good lubrication. If kerosene or other fuel with low lubricating ability is used, there will be a big drop in durability. *1: ASTM D975 No. 1 *2 : Use only diesel fuel. *3: If a machine equipped with an auto-greasing system is operated at temperatures below -20є C (-4є F), use lithium-based grease No. 0. If the machine is operated below -20° C (-4° F), a separate device is needed. Consult your Komatsu distributor for details. *4:

The letters “ASD” are stamped on the name plate of machines equipped with the antislip differential axle. *5: For the conventional differential, except for “AX075,” the oil for machines equipped with the antislip differential in the table below and E030 can be used. However, in the case of “E030,” depending on conditions such as the way the brakes are used and the oil temperature, the brakes may squeal just before the machine stops, but there is no problem with the brake performance or durability. AX075 is used in the conventional differential is shown in the table below. *6: For machines equipped with the antislip differential axle, select from the oil given in the table below.

Remark When fuel sulphur content is less than 0.5%, change the oil in the oil pan according to the periodic maintenance hours described in this manual. Change oil according to the following table if fuel sulphur content is above 0.5%. Starting the engine when ambient temperature is lower than 0° C (32° F), be sure to use engine oil of SAE 10W, SAE 10W-30 and SAE 15W-40, even though the atmospheric temperature goes up to 10° C (50° F) more or less during the day. Use API classification CI-4 as engine oil. If any other API classification is used, reduce the engine oil change interval to half.

We recommend Komatsu genuine oil which has been specifically formulated and approved for use in engine and hydraulic work equipment applications. 3-18 WA480-5L Maker Brand (antislip differential) Brand (conventional differential) Remarks SHELL DONAX TD 5W-30 North American manufactured DONAX TD 20W-40 cannot be used in antislip differentials. ESSO TORQUE FLUID 56 North American manufactured cannot be used in antislip differentials MOBIL MOBILFLUID 424 FUCHS RENOGEAR HYDRA ZF 20W-40 CALTEX RPM TRACTOR HYDRAULIC FLUID CHEVRON TRACTOR HYDRAULIC FLUID TEXACO TDH OIL