MAINTENANCE GENERAL MAINTENANCE AND INSPECTION INITIAL 250 HOURS SERVICE Perform the following maintenance only after the first 250 hours. CHANGE TRANSMISSION OIL FILTER CARTRIDGE REPLACE HYDRAULIC TANK FILTER ELEMENT For details of the method of replacing or maintaining, see the section EVERY 1000 HOURS and 2000 HOURS SERVICE. WHEN REQUIRED CLEANING THE MACHINE CLEAN TIPS Never use flammable liquids to clean your machine. Use only approved non-flammable cleaning solvents to clean parts or the machine itself. Avoid using high pressure steam cleaners or caustic soaps to wash the machine if possible.
Steam cleaning or using caustic soaps may damage paint, wiring or sensitive electrical components. Never use high pressure water or flood the inside of the operator’s cab. Doing so may damage sensitive electrical components. When pressure washing, use high pressure hot water and mild grease cutting soaps. WASTE HANDLER MACHINE Before preparing to pressure wash this machine it is important to open protective covers (1), (2) and (3) as well as any other covers due to the possible build-up of trash which could hinder operation of the machine or possibly cause a fire. Belly Pans WA480-5L 3-25