Komatsu — ENGINE AIR FILTER

MAINTENANCE CLEANING OR REPLACING OUTER ELEMENT 1. Open the top cover at the front of the engine side cover on the right side of the machine. 2. Remove three clips (2), then remove dust cup (3). 3. Remove the outer element (4). Never remove the inner element (5). If it is removed, dust will enter and cause engine trouble. 4. Clean the inside of the air cleaner body and dust cup. The inner element must not be cleaned and used again. When replacing the outer element, replace the inner element at the same time. 5. Direct dry compressed air (less than 0.69 MPa (99.4 psi)) to the outer element (4) from inside along its folds, then direct it from outside along its folds and again from inside.

3-28 WA480-5L