OPTIONS, ATTACHMENTS If the measured data is not needed, press the load meter cancel switch (4). The data for the last calculation is canceled while the previous measurement is now displayed (3). To return the total load display (3) to 0, press the load meter sub total switch (5). LOAD METER REMAIN MODE For details of the method of switching to the remain mode, see “SETTING THE REMAIN MODE” on page 5-8. “REMAINING TARGET” lights up on load meter display (1). The bucket load is displayed on load meter display (2), and the amount remaining to the target is displayed on display (3). If the measured data is not needed, press load meter cancel switch (4).
The data for the last calculation is canceled and display (3) returns to the display for the previous measurement. To return total load display (3) to 0, press load meter sub total switch (5). SELECTION OF DISPLAY FOR TYPE OF LOAD For details of the method of selecting the type of load, see “SETTING ADDITION MODE” on page 5-7 and “SETTING THE REMAIN MODE” on page 5-8. It is possible to make categories for a maximum of five types of material for TOTAL LOADED or REMAINING TARGET. If the settings for types A to E are changed for each type of material when operations are carried out, it is possible to store in memory the data for TOTAL LOADED or REMAINING TARGET for each type of material.
One of the selected types of material A to E is displayed on the load meter display (1). WA480-5L 5-5