Komatsu — SETTING THE TIME ON THE CLOCK

OPTIONS, ATTACHMENTS 12. At this point, the amount remaining in the bucket (3.1 tons) is subtracted from the target load for the next loading operation, and the result (8.9 tons) is displayed as the target load.The amount remaining in the bucket is 3.1 tons. 12.0 - 3.1 = 8.9 tons, so 8.9 tons is displayed as the next target load. 13. If the second loading operation is to be performed without using the load remaining in the bucket, press the load meter cancel switch. The target load will return to the initial setting (12 tons). The target load is displayed as 12.0 tons. SETTING THE TIME ON THE CLOCK (The time display is only available on machines equipped with the load meter) 1.

Check that the normal service meter and time are displayed on the character display. 2. Press the ( ‘ ) of monitor panel selector switch 1 and display “LOAD METER”. 3. Press the ( ‘ ) of monitor panel mode selector switch 1, then press the (>) or ( “DAY & TIME ADJUST”. 4. Press the ( ‘ ) of monitor panel mode selector switch 1.The top line displays “ADJUST 23: 59". The bottom line displays “2000/01/ 01”. Remark Once the time is input, the clock will show the correct time from that time on. 5-18 WA480-5L