OPTIONS, ATTACHMENTS AUTO-GREASING SYSTEM With this system, the grease is automatically supplied through the computer controls. If any abnormality occurs in the lubrication controller, please inform your Komatsu distributor of the symptoms and ask for repairs to be carried out. OPERATING AUTO-GREASING SYSTEM 1. Turn the switch ON. Remark Immediately after the power is turned on, all the display lamps on the lubrication controller inside the box under the step, on the left side of the machine light up for several seconds. This is a self check for the lamps, and does not indi- cate any abnormality.
The display portion for starting the calibration of the greasing interval will flash, but all other displays will go out after a few seconds. However, even if the greasing interval has not been reached, if the switch is ON/OFF repeatedly, grease will automatically start due to the function of the supplemental circuit, immedi- ately after starting switch is turned on. After display of the 7-segment LED and greasing-in-progress LED, as shown in the “LUBRICATION CONTROLLER DISPLAY TABLE”, the above condition will be returned. 2. Centralized greasing is carried out in accordance with the set time and frequency limit for greasing.
Remark If the starting switch is turned ON/OFF frequency before the greasing interval is reached, the warning for the remaining time is displayed earlier, but this does not indicate any abnormality. WA480-5L 5-41