SAFETY MOUNTING AND DISMOUNTING When mounting or dismounting this machine, always be sure the work equipment is fully lowered to the ground and the engine is OFF. Use all hand holds and step plates on your machine. Never jump off or on to the machine. Before getting on the machine, if there is any oil, grease, or mud on your shoes, rails, steps or platforms, wipe it off immediately, always keep these areas clean, and in good condition. Never get on or off a moving machine. These actions may lead to serious injury. Always bring the machine to a full stop. Be sure machine is at a full stop, equipment lowered and parking brake set before entering or exiting machine.
WASTE HANDLER APPLICATIONS On the waste handler application, there is no right side ladder equipped with the machine. This area is not an entrance and exit point during normal operations. Use this as an emergency exit only if necessary. WA480-5L 1-5