KEEPING THE MACHINE CLEAN SAFETY Never use flammable liquids to clean your machine. Use only approved non-flammable cleaning solvents to clean parts or the machine itself. Avoid using high pressure steam cleaners or caustic soaps to wash the machine if possible. Steam cleaning or using caustic soaps may damage paint, wiring or sensitive electrical components. Never use high pressure water or flood the inside of the operator’s cab. Doing so may damage sensitive electrical components. When pressure washing, use high pressure hot water and mild grease cutting soaps. Always grease the machine after cleaning to push any water out of the pivot point connections.
RUNNING THE MACHINE DURING MAINTENANCE If during maintenance the engine must be run have someone remain in the operator’s seat while the engine is running. This is if the engine must be shut down quickly. Be sure all work equipment is “ LOCKED ” and the ECSS system is off. For machines equipped with the Electronically Controlled Suspension System (ECSS) be sure the system is off before proceeding with any maintenance procedures. Set the parking brake in the “ LOCK ” mode and instruct the person sitting in the cab not to operate any controls unless instructed to. WA480-5L 1-17