Komatsu — EMERGENCY STEERING PILOT LAMP

OPERATION PARKING BRAKE PILOT LAMP This monitor (1) lights up when the ignition switch is in the “ON” position or when the parking brake is applied. COOLING FAN REVERSE ROTATION PILOT LAMP This monitor (2) lights up when the when the ignition switch is in the “ON” position or when direction of rotation of the cooling fan is reversed, and at the same time, the “COOLING FAN REVERSE” is displayed on the character display. Not used on Waste Handler applications (WASTE HANDLER ONLY) This LED flashes when the direction of rotation of the cooling fan is reversed. The fan will coast for approx. 8 seconds before reversing, the indicator light will light up until condition has stopped.

EMERGENCY STEERING PILOT LAMP This monitor (3) lights up when the ignition switch is in the “ON” position or when the emergency steering is being actuated. If the engine stops when the machine is traveling or an abnormality occurs in the steering oil pressure circuit, and the machine is traveling at a speed of more than 2 km/h (1.2 mph), the emergency steering is automatically actuated and the lamp lights up. If the lamp lights up, move the machine immediately to a safe place, stop the engine, and check the condition. The lamp flashes, if the emergency steering is actuated continuously for one minute, and at the same time, “E02 EMR S/T OVERRUN” is displayed on the character display.

There is an emergency steering self-check function. For details, “EMERGENCY STEERING SELF-CHECK FUNCTION” on page 2-101. 2-22 WA480-5L