Komatsu — 17. GUIDES TO MAINTENANCE

MAINTENANCE Checking underneath machine: When working in rocky areas, check for damage underneath the machine, wear and damaged bolts and nuts. Precautions when washing machine: ! Never spray steam or water directly at the radiator. ! Do not allow water to get on any electrical component Pre-and post-work checks: Before starting work in mud, rain, snow or at seashore, check plugs and valves for tightness. Wash the machine immediately after working to protect components from rusting. Lubricate components more frequently than usual. Be sure to lubricate work equipment pins daily if they are submerged in water.

On jobsites were heavy-duty operations are common, reduce the maintenance intervals and grease the machine more frequently. Dusty worksites: When working at dusty worksites, do as follows: ! Inspect the air cleaner clogging pilot lamp to see whether the air cleaner is plugged up. Clean the air cleaner at shorter intervals than specified. ! Clean the radiator core frequently to avoid clogging. ! Clean and replace the fuel filter frequently. ! Clean electrical components, especially the starting motor and alternator, to avoid accumulation of dust. Avoid mixing oils: Never mix oils of different brands.

If the only oil you have is a different brand from the one that is used in the machine, do not add it in but replace all the oil. 3-4