Komatsu — 24.5.3 LUBRICATING

MAINTENANCE 24.5.3 LUBRICATING WARNING ! Apply the parking brake, and lock the front and rear frames with the safety bar and pin. ! set the work equipment in a stable condition, then turn OFF the engine and apply the locks for the work equipment control levers. 1 Use a grease pump tp pump in grease through the grease fittings marked by the arrows in the following diagrams. 2 After greasing, wipe off any old grease that was pushed out. 1 Bucket pin (2 places) 2 Bucket link pin (2 places) 3 Rear axle pivot pin (2 places) 3-46