Komatsu — 24.8.3 LUBRICATE

MAINTENANCE 24.8.3 LUBRICATE WARNING ! Set the work equipment in a stable condition, then turn OFF the machine and apply the lock for the work equipment control levers. ! Apply the parking brake, and lock the front and rear frames with the safety bar and pin. ! Use a grease pump to pump in grease through the grease fittings marked by the arrows. ! After greasing wipe off any old grease that was pushed out. 1 Front drive shaft (1 Place) 2 Drive shaft center support (1 place) 3 Center draive shaft (2 places) 4 Rear drive shaft (2 places) 3-58