Komatsu — Komatsu PC290NLC-6K and PC290LC-6K Hydraulic Excavator Operation & Maintenance Manual

12. OPERATION 12.20 CHECK AFTER STOPPING ENGINE 1. Walk around the machine and check the work equipment, paintwork, and undercarriage, and check also for leakage of oil or water. If any abnormalities are found, repair them. 2. Fill the fuel tank. 3. Check the engine compartment for paper and debris. Clean out any paper and debris to avoid a fire hazard. 4. Remove any mud stuck to the undercarriage. 12.21 LOCKING Always lock the following places. a Door of operator’s cab Always remember to close the window.

b Fuel tank filler port c Engine hood d Battery box cover e Left side door of the machine f Right side door of the machine REMARK Use the starting switch key to open and close all these places. 12.22 OVERLOAD WARNING DEVICE B Excavators are provided with this device to warm the operator about tipping over while lifting loads. A buzzer will sound when the machine is in Lo mode and the machine nears its lifting capacity. NOTE Only conduct lifting operations in Lo mode as the overload warning system is only active in this mode. PC290-ENG 2-82 e