Komatsu — Komatsu PC290NLC-6K and PC290LC-6K Hydraulic Excavator Operation & Maintenance Manual

PRECAUTIONS WHEN HANDLING OPERATION: explanation of Devices 1. Dual Purpose Control Pedal. The additional pedal to the right of the travel levers controls two functions on a PC290LC/NLC-6K-Piece Boom machine: In normal operation the pedal controls the operation of the second boom adjust cylinder. Pressing down on the front of the pedal pushes the second boom away from the cab, pressing down on the rear of the pedal pulls the second boom towards the cab. The foot pedal is also used to operate the HCU circuit. To select HCU operation, operate the additional switch on the RH. stand console.

Once HCU operation has been selected, it is controlled by the foot pedal in the same way as the mono-boom machine. The second boom adjust cylinder will not operate if HCU circuit operation is selected at this switch. Extend 2 nd boom raise cylinder Dual purpose control pedal Five blank additional switches Retract 2 nd boom raise cylinder “HCU Operation” select switch Colour: Blue Press front of pedal Press rear of pedal PC290-ENG 3-18