23.
MAINTENANCE SCHEDULE CHART SERVICE ITEM PAGE EVERY 1000 HOURS SERVICE Change oil in swing machinery case 3-65 Check oil level in damper case, add oil 3-66 Check all tightening parts of turbocharger 3-66 Check play of turbocharger rotor 3-66 Check and adjust valve clearance (1 st 1000 hour only) 3-66 Check fan belt tensioner bearing, belt and fan hub 3-67 Check fan belt tension 3-67 EVERY 2000 HOURS SERVICE Change oil in final drive case 3-68 Clean hydraulic tank strainer 3-69 Clean, check turbocharger 3-70 Check alternator, starting motor 3-70 Check vibration damper 3-70 Change antifreeze 3-70 Check and adjust valve clearance 3-70 EVERY 4000 HOURS SERVICE Check water pump 3-71 EVERY 5000 HOURS SERVICE Change oil in hydraulic tank 3-71 23.2 MAINTENANCE WHEN USING HYDRAULIC BREAKER For machines equipped with a hydraulic breaker, the hydraulic oil deteriorates faster than for normal bucket digging operations, so set the maintenance intervals as follows.
Replacing hydraulic filter element On new machines, replace the element after the first 100 to 150 hours, then carry out further replacement of the element according to the ta- ble on the right. Changing oil in hydraulic tank Change the oil according to the table on the right. PC290-ENG 3-28