Komatsu — Komatsu PC290NLC-6K and PC290LC-6K Hydraulic Excavator Operation & Maintenance Manual

24. SERVICE PROCEDURE 24.2.2 CLEAN INSIDE OF COOLING SYSTEM Stop the machine on level ground when cleaning or changing the coolant. Use a permanent type of antifreeze. If, for some reason, it is impossible to use permanent type antifreeze, use an antifreeze containing ethylene glycol. PC290-ENG 3-32 WARNING • Soon after the engine has been stopped, the coolant is hot and can cause personal injury. Allow the engine to cool before draining water. • Since cleaning is performed while the engine is running, it is very dangerous to enter the rear side of the machine as the machine may suddenly start moving. If the under cover is left removed, it may interfere with the fan.

While the engine is running, never enter the rearside of the ma- chine. • Never remove the radiator cap when the engine is at oper- ating temperature. At operating temperature, the coolant is under pressure. Steam blowing up from the radiator could cause personal injury. Allow the engine to cool until the radiator filler cap is cool enough to touch with your hand. Remove the filler cap slowly to allow pressure to be relieved. WARNING