Komatsu — Komatsu PC290NLC-6K and PC290LC-6K Hydraulic Excavator Operation & Maintenance Manual

24. SERVICE PROCEDURE 24.2.3 CHECK AND TIGHTEN TRACK SHOE BOLTS If the machine is used with track shoe bolts a loose, they will break, so tighten any loose bolts immediately. Method for tightening 1. Tighten first to a tightening torque of 390 ± 40 Nm (40 ± 4 kgm, 290 ± 30Ib ft) , then check that the nut and shoe are in close contact with the link mating surface. 2. After checking, tighten a further 120 o ± 10 o . Order for tightening Tighten the bolts in the order shown in the diagram. After tightening, check that the nut and shoe are in close contact with the link mating sur- face. PC290-ENG 3-36