24. SERVICE PROCEDURE If the track tension is not the standard value, adjust in the following manner. Adjustment WARNING Grease inside the adjusting mechanism is under high pressure. Grease coming from plug a under pressure can penetrate the body causing injury or death. For this reason, do not loosen any part other than the plug a more than one turn. Do not bring your face in front of the plug (1). If the track tension is not relieved by this proce- dure, please contact your Komatsu distributor. When increasing tension Prepare a grease gun. 1. Pump in grease through grease fitting b with a grease gun. 2.
To check that the correct tension has been achieved, move the ma- chine backwards and forwards. 3. Check the track tension again, and if the tension is not correct, adjust it again. 4. Continue to pump in grease until S becomes 0 mm. If the tension is still loose, the pin and bushing are excessively worn. so they must be either turned or replaced. Please contact your Komatsu distributor PC290-ENG 3-38