24. SERVICE PROCEDURE 24.6.4 CLEAN AND INSPECT RADIATOR FINS, OIL COOLER FINS AND CONDENSER FINS (ONLY FOR MACHINES EQUIPPED WITH AIR CONDI- TIONER) WARNING If compressed air, steam, or water hit your body directly, there is danger of injury. Always wear protective glasses. mask, and safety shoes. 1. Open the engine hood and rear door on the left side of the machine. Loosen bolts a and remove the radiator front cover. 2. Blow off mud, dust or leaves clogging the radiator fins and oil cooler fins using compressed air. At the same time, clean the net in front of the oil cooler. Clean the condenser fins on machines equipped with the air conditioner.
The condenser is mounted on the front of the cooling package. Steam or water may be used instead of compressed air. After clean- ing, fix the cover with bolts a . 3. Check the rubber hose. Replace with a new one if the hose is found to have cracks or to be hardened by ageing. Further, check hose clamps for looseness. NOTICE To prevent damage to the fins, apply compressed air from an appropriate distance. Damaged fins may cause water leakage or overheating. In a dusty site, check the fins daily, irrespective of the maintenance interval. PC290-ENG 3-63