28. MACHINES READY FOR ATTACHMENTS 3. ATTACHMENT CONTROL PEDAL This is used to operate the attachment. When the operator depresses the pedal at the front, neutral or rear portions, the attachment moves as follows. Hydraulic breaker Pedal front a : actuated Pedal neutral N : stopped Pedal rear b : stopped When the breaker is used, select the breaker operation mode (B.O) in the monitor panel. For other attachments, confirm with the manufacturer regarding the relation between pedal operation and attachment movement when the attachment is mounted. Use the attachment only after confirming the above.
Flow from the left hand second attachment pedal can be modified by adjusting the stroke limiting bolts located under the pedal. 4. ACCUMULATOR The accumulator is provided to release the pressure remaining in the attachment circuit after stopping the engine. Normally, never touch it. PC29-ENG 5-6 WARNING The accumulator is filled with high-pressure nitrogen gas, and it is extremely dangerous if it is handled in the wrong way. For handling procedure, see 11.19 ”HANDLING ACCUMULATOR’’. WARNING