Komatsu — Komatsu PC290NLC-6K and PC290LC-6K Hydraulic Excavator Operation & Maintenance Manual

29. INTRODUCTIONS OF ATTACHMENTS 29.2 ATTACHMENT INSTALLATION COMBINATION TABLE PC290LC-6K, PC290NLC-6K This table lists the combination of attachments which can be installed to the standard short arms. H Can be used for general digging. ! Can be used only for light-duty digging and loading work. x Cannot be used. Categories of use For general digging : digging or loading sand, gravel, clay etc. For light duty digging : digging or loading dry, uncaked earth and sand, mud etc. For loading work :

loading dry, loose earth and sand For digging or loading hard soil or soft rock, it is recommended that the strengthened bucket with high durabil- ity and high wear resistance be employed NOTICE When the extension arm is equipped, if the bucket is drawn tot the machine body, the arm interferes with the body. Operate the extension arm carefully. When the boom is fully lowered during oblique digging, the boom interferes with the undercarriage. Operate the boom carefully. BUCKET AND ARM COMBINATION These charts are based on over-side stability with fully loaded bucket at maximum reach. A wide variety of buckets & attachments is available. Contact your local dealer for more information.

H Material weight up to 1.8 t/m 3 (3030 lb/cu.yd). j Material weight up to 1.5 t/m 3 (2530 lb/cu.yd). ! Material weight up to 1.2 t/m 3 (2020 lb/cu.yd). x Not usable. PC29-ENG 5-14 Bucket capacity (heaped) Width Weight No. of teeth Arm SAE, PCSA CECE Without side cutters 2.0 m (6’7'’) 2.5 m (8’2'’) 3.05 m (10’) 3.5 m (11'5”) 0.74 m3 700 mm 740 kg H H H H 0.95 m3 900 mm 848 kg H H H H 1.16 m3 1100 mm 956 kg H H H H 1.37 m3 1300 mm 1064 kg H H H H 1.58 m3 1500 mm 1172 kg H H H j 1.80 m3 1700 mm 1280 kg H H j !