8. PRECAUTIONS FOR MAINTENANCE WARNING: For reasons of safety, al- ways follow these safety precautions. 8.2 DURING MAINTENANCE PERSONNEL Only authorised personnel can service and repair the machine. Extra precaution should be used when grinding, welding, and using a sledge-hammer. PC290-ENG 1-24 ATTACHMENTS • Place attachments that have been removed from the machine in a safe place so that they do not fall. If they fall on you or others, serious injury could result. ATTACHMENTS WORK UNDER THE MACHINE • Always lower all movable work equipment to the ground or to their lowest position before performing service or repairs under the machine.
• Always block the track shoes of the machine securely. • Never work under the machine if the machine is poorly supported. WORK UNDER THE MACHINE KEEP THE MACHINE CLEAN • Spilt oil or grease, or scattered tools or broken pieces are dangerous because they may cause you to slip or trip. Always keep your machine clean and tidy. • If water gets into the electrical system, there is danger that the machine may not move or may move unex- pectedly. Do not use water or steam to clean the sensors, connectors, or the inside of the operator’s compartment.