Komatsu PC160-6K, PC180LC-6K, PC180NLC-6K, PC200EN-6K, PC200EL-6K — Komatsu PC160-6K, PC180LC-6K, PC180NLC-6K, PC200EN-6K, PC200EL-6K User Manual

A WARNING: For reasons of safety, al- ways follow these safety precautions. 7. PRECAUTIONS DURING OPERATION 7.6.2 PRECAUTIONS FOR LIFTING OPERATION — GRADUAL LIFTING OPERATION | ¢ When carrying out lifting operations, run the engine at low idling and use the L.O. (lifting operation mode). e Avoid sudden lever shifting and acceleration. ¢ Swing speed is three to four times that of movable cranes. Therefore, be especially careful when performing swing operation. NEVER LEAVE THE OPERATOR’S SEAT| e Never leave the operator’s seat while lifting a load. —| NEVER CARRY OUT EXCESSIVE OPERATIONS| e Operation exceeding machine performance may result in accident or failure.

¢ Carry out lifting operation within specified load limit. e Never carry out operations which may damage the machine such as overload or over-impact-load. e Never drag a load laterally or longitudinally, nor retract the arm, otherwise, a dangerous situation may result. INCORRECT nr e INCORRECT TRAVELLING WHILE LIFTING A LOAD | Never travel while carrying a load. OPERATING POSTURE | 1-20 Ifthe machine posture is not correct, the wire ropes or ring may detach from the hook. Confirm that the hook angle is correct to avoid this. PC160/180/200-6k-ENG ¢