OPERATOR'S STATION Temperature Control Switch (9) Sets the air temperature in the range of 18 to 32.0 °C (65 to 90 °F) in the MANUAL and AUTO modes. Temperature can be set by 0.5 °C (0.9 °F) increments. The set-temperature is displayed on the LCD (8) center. • Increasing Temperature Each time the top side mark “ 8 9 ” on temperature control switch (9) is pressed, the set-temperature is increased by 0.5 °C (0.9 °F) increments. • Decreasing Temperature Each time the bottom side mark “ M178-01-017 ” on temperature con- trol switch (9) is pressed, the set-temperature is decreased by 0.5 °C (0.9 °F) increments.
Temperature Control Switch • Temperature Mode Change (Centigrade Fahrenheit) Press both “ ” marks on the temperature control switch for longer than 5 seconds at the same time to change the temperature mode (Centigrade Fahren- heit). (Unit in temperature mode is abbreviated.) ” and “ Temperature Mode Display on LCD Centigrade 18.0 to 32.0 Fahrenheit 63 to 91 1-69