OPERATING THE ENGINE STARTING THE ENGINE IN ORDINARY TEMPERA- TURE 1 1. Pull the pilot control shut-off lever (1) up to the LOCK po- 2. Turn engine control dial (3) to the slow idle position. sition. 3. Sound horn to alert bystanders. 4. Insert key switch (2). Turn it ON position. 5. “Wait-screen (nothing is displayed)” is displayed on the monitor for 2 seconds. Regardless of the pilot control shut-off lever position, the engine can not be cranked during this duration. 6. When the password input screen is displayed on the monitor, input the password. Unless the TEN-key function (ignition block system) is activated, this screen is not dis- played. LOCK Position M1U1-01-025 IMPORTANT:
When required to activate the TEN-key func- tion (ignition block system), consult your nearest Hitachi dealer. 2 7. The basic screen will be displayed on the monitor. Check that the preheat indicator (4) is OFF at this time. Slow Idle 8. Turn key switch (2) to start engine. M178-01-049 M1U1-01-033 3 IMPORTANT: Prevent starter damage. Never operate starter motor for more than 10 seconds at a time. If engine fails to start, return key switch to OFF. Wait for more than 30 seconds, then try again. After a false start, do not turn key switch until engine stops or starter may be damaged. 9. Release key switch (2) immediately after the engine has started. It will return to ON position.
Password Input Screen T1V5-05-01-002 4 Basic Screen M1J1-03-004 3-4