Transmissions When the transmission is in automatic mode, the trans- mission automatically selects and engages the gears, although the transmission will respond to upshift and downshift requests as though in manual mode. See the instructions for shifting under heading "Manual Mode" below. are too far apart, the clutch must absorb the difference in speed by generating heat. To downshift in MANUAL, press the downshift button (down arrow), and release. The number of the gear will appear on the mode indicator. If the requested gear is available, the transmission will shift down.
Manual Mode If any requested gear is not available, an audible warn- ing will sound and the digital display will indicate that the gear is not available. When the transmission is in manual mode, the driver must select the appropriate gear, using the shift buttons on the push-button shift selector. Selecting Gears, AutoShift R (Reverse) To upshift in MANUAL, press the upshift button (up ar- row), and release. The number of the gear will appear on the mode indicator. If the requested gear is avail- able, the transmission will shift up. Reverse (R) is used to back the vehicle. Make sure the vehicle comes to a full stop and the clutch pedal has been pressed before shifting into reverse.
CAUTION To select reverse, press the clutch pedal to the floor. Then press the R button. Do not attempt to upshift until the vehicle has reached a sufficient speed. The clutch absorbs the speed difference by generating heat, which causes the clutch to wear out too soon. N (Neutral) Neutral (N) is used for starting, parking, or any station- ary operation. No gear is selected. The transmission must be in neutral to start the engine. Many drivers upshift into the next gear or even skip- shift into a higher gear before the vehicle has reached the correct speed. This type of shifting is almost as bad as starting off in a gear that is too high.
When the en- gine speed (rpm) and the vehicle speed (mph or km/h) IMPORTANT: If the vehicle starts up in any gear but neutral, bring the vehicle to an authorized Freightliner service facility as soon as possible. 5.20