Freightliner Business Class — Business Class Driver's Manual

Transmissions 1 CAUTION 2 Extended idling in reverse may cause transmission overheating and damage. Do not idle in reverse for more than 5 minutes. Select P (park), PB (auto-apply parking brake), or N (neutral) when time at idle exceeds 5 minutes. R 3 N NOTE: The shift into reverse may not succeed if a range inhibitor is active. Check for illumination of the RANGE INHIBIT indicator. D N (Neutral) 11/23/99 f270113 1. Digital Display 2. Mode Identification 3. Mode Button The neutral position places the transmission in neutral. This position is used when starting the engine and for stationary operation. Fig.

5.18, Allison Push-Button Shift Selector WARNING R (Reverse) Reverse is used to back the vehicle. When the selector is in reverse, the reverse warning signal will sound. Al- ways bring the vehicle to a complete stop before shift- ing from a forward range to reverse, or from reverse to a forward range. When in neutral, failure to apply vehicle brake sys- tems may allow the vehicle to move unexpectedly, possibly causing property damage or personal in- jury. When neutral is selected, the vehicle service brakes, parking brake, or emergency brake must be applied. Selecting neutral does not apply vehicle brakes unless 5.32