Transmissions Occasionally the road, load, or traffic conditions make it desirable to restrict the automatic shifting to a lower range. The lower the gear range, the greater the engine braking power. CAUTION Never use park when the vehicle is in motion. This can result in severe transmission damage. 2. Use reverse (R) to back the vehicle. Completely stop the vehicle before shifting from a forward gear to reverse or from reverse to forward. There is only one reverse gear. 5. Use 2nd (2) for slow driving in heavy city traffic, or on mountain roads when more precise speed con- trol is desirable.
Use it also for climbing long grades and for engine braking when descending moder- ately steep grades. To prevent excessive engine speed, do not drive faster than 45 mph (72 km/h) in this range. 3. Engage neutral (N) and apply the parking brake when the vehicle is parked with the engine running. The engine may be started in this position. CAUTION Do not allow the vehicle to coast in neutral. This can result in severe transmission damage. Also, no engine braking is available. 4. Select drive (D) for all normal driving conditions. The vehicle will start out in 1st gear, and as speed increases, the transmission will upshift through each gear automatically.
As the vehicle slows down, the transmission will downshift to the correct gear automatically. 01/16/95 f600823 Fourth gear (overdrive) can be locked out by press- ing the O/D OFF switch (for more information, see Overdrive Operation). See Fig. 5.20 . Fig. 5.20, Overdrive OFF Switch 5.37