Freightliner Business Class — Business Class Driver's Manual

Brakes booster. The brake system warning light comes on if there is a problem within the system. Bring the vehicle to a safe stop and correct the problem before continu- ing operation of the vehicle. See Group 42 of the Busi- ness Class ® Trucks Service Manual for hydraulic brake system troubleshooting and adjustment procedures. Meritor WABCO ® Antilock Braking System (ABS), Hydraulic Brake Systems The Meritor WABCO ® Antilock Braking System (ABS) is an electronic wheel speed monitoring and control sys- tem that works with the hydraulic brake system. ABS passively monitors vehicle wheel speed at all times, but controls wheel speed during an emergency or reduced- traction stop.

In normal braking applications, the stan- dard hydraulic brake system is in effect. Operation Before driving the vehicle, secure all loose items in the cab so that they will not fly forward during a full brake application. Make sure that all occupants are wearing seat belts. Check that the brake system warning light is off after releasing the hand brake. If the warning light does not go off, correct the problem before continuing operation of the vehicle. IMPORTANT: For proper ABS system operation, do not change tire sizes. The sizes of the tires in- stalled during production are programmed into the electronic control unit (ECU).

Installing different sized tires could result in inaccurate wheel speed signals to the ECU resulting in a reduced braking force, which could lead to longer stopping dis- tances. During normal brake stops, depress the foot brake con- trol pedal until braking action slows down the vehicle. Increase or decrease the pressure on the pedal so that the vehicle comes to a smooth, safe stop. When the forward speed of the vehicle has decreased to almost the idling speed of the engine, push the clutch pedal in, and shift the transmission into Neutral. Apply the hand parking brake if the vehicle is to be parked.

ABS includes signal-generating tone wheels and sen- sors located in the wheel hubs of each sensed axle. The sensors transmit vehicle wheel speed information to the ECU located behind the passenger seat which interprets these signals to calculate wheel speed and a vehicle reference speed. If the calculations indicate wheel lockup, the appropriate control circuit signals the 7.9