Pretrip Inspection and Daily Maintenance reservoir) in the transmission using one of the fol- lowing procedures: Hot Check Operate the transmission in a Drive (D) range until normal operating temperature, 160 to 200°F (71 to 93°C), is reached. Park the vehicle. Shift to Neutral (N) and ap- ply the parking brake. Let the engine run at idle. Wipe the dipstick clean and check the fluid level. A safe operating level is any level within the HOT RUN (upper) band on the dipstick. If the fluid is not within this range, add or drain fluid as needed to bring the level to the top of the HOT RUN band. See the Business Class ® Trucks Maintenance Manual for fluid types and capacities. f010346 16.
Check the oil level in the automatic transmission if equipped. Fig. 9.7, Engine Oil Level Checking Cold Check A cold check may be made when the sump tem- perature is 60 to 104°F (15 to 40°C). NOTE: The fluid must be warm to ensure an accu- rate check. The fluid level rises as temperature in- creases. Run the engine for at least one minute to clear the fluid system of air. With the vehicle on a level surface, check the oil level (the dipstick is next to the windshield washer With the engine running, wipe the dipstick clean and check the fluid level. Any level within the 9.11