Pretrip Inspection and Daily Maintenance 28. Check the clutch pedal free-travel. The main indicator for assessing clutch wear is clutch pedal free-travel. Clutch pedal free-travel is a decreased resistance felt at the top of the clutch pedal stroke. With the clutch pedal in this range, the clutch is fully engaged and the only resistance to clutch pedal movement is return spring tension. Clutch pedal free-travel should be approximately 1-1/2 to 2 inches (38 to 51 mm). See Fig. 9.9 . If the clutch pedal free-travel is less than 3/4 inch (19 mm), the clutch must be adjusted internally. For in- structions, see Group 25 of the Business Class ® Trucks Service Manual. A CAUTION 06/09/94 f250130 A.
About 1-1/2 to 2 Inches (38 to 51 mm) Excessive clutch pedal free-travel may prevent com- plete clutch disengagement. Insufficient clutch pedal free-travel causes slippage and short clutch life. Never wait for the clutch to slip before making a clutch adjustment. Fig. 9.9, Check Clutch Free Pedal den stop or crash, possibly resulting in serious in- jury or death. 29. Inspect the seat belts and tether belts (if so equipped). See Fig. 9.10 . NOTE: When any part of a seat belt system needs replacement, the entire seat belt must be replaced, both retractor and buckle side.
WARNING 29.1 Check the web for fraying, cuts, or extreme wear, especially near the buckle latch plate and the D-loop guide area. Inspect and maintain seat belts as instructed below. Worn or damaged seat belts could fail during a sud- 9.18