Vehicle Access and Features 3. To release the bunk restraint, push the release but- ton on the buckle at the head of the bunk and pull the link from the buckle. 2 3 Repeat this step for the other two buckles to com- pletely release the bunk restraint. Bunk Mattress To prevent damage to the bunk mattress and to ensure even wear, it is recommended that the mattress be turned over on a monthly basis. 4 5 Under Bunk Storage To achieve maximum use of the under bunk storage, move the driver and passenger seats to the most for- ward position on the slide tracks. When you are done accessing the storage compartment, adjust the seats as necessary before operating the vehicle. 1 f910150 02/14/96 1.
Mattress 2. Sleeper Wall 3. Restraint 4. Belt Anchor 5. Buckle Fuse/Relay/Circuit Breaker Identification Fig. 2.16, Bunk Restraint Repeat steps 1 and 2 for the other two belts lo- cated in the middle and upper portion of the bunk to lock the restraint in place. NOTE: The fuse/relay/circuit breaker panel ( Fig. 2.17 ) is located behind an access panel below the right-hand corner (passenger’s side) of the dash. To gain access to the panel, remove the two fas- teners that attach the cover to the cab floor and 2.17