Driver Controls and Instruments OFF ON ACC START 10/26/94 f600357a f600371b 01/15/96 Fig. 3.5, Mirror Heat Switch, Optional Fig. 3.4, Ignition (switch locations typical) the high-beam headlights are already on, and switching from low beams to high beams will switch off the road lights. brighten the lights and down to dim them. Move the control lever all the way down to turn them off. See Fig. 3.6 . For vehicles built to operate in Canada, the taillights and clearance lights must be on before the road lights can be turned on.
The road light switch will not turn on the road lights unless the headlight switch is all the way up (headlights, taillights, clearance lights, marker lights, and panel lights on) or down (taillights, clearance lights, marker lights, and panel lights on). Road Light Switch, Optional The road light switch operates the road lights which are recessed into the front bumper. See Fig. 3.7 . For vehicles built to operate in the United States, the low-beam headlights must be turned on before the road lights can be turned on. The road lights won’t go on if 3.5