Komatsu — AIR CONDITIONER, HANDLING

. OPERATION EXPLANATION OF COMPONENTS 3 - 61 FRESH/RECIRC SELECTOR SW ITCH ct between recirculation of the air h air from outside. ndicator lamp (A) at the top of the This switch (3) is used to sele inside the cab or intake of fres When the switch is pressed, i switch lights up. Recirculation of air inside cab Press this switch (B) to use onl y the air inside the cab. Use this position to carry out rapid heating o r cooling o f the cab or when the outside air is dirty. Intake of fresh air from outside Press this switch (C) to carry o ut heating or cooling with fresh air taken in fro m the ou tside.

Use this position when fresh air is taken in from outsid e the cab, or when removing the mis t from t he cab wi ndow s. REMARK When fresh air is taken into the cab, air pressure in the cab increases , which prevents the d ust fr om entering. When neither heating nor cooling is entering the cab. needed, bring in clean fresh air, with your preferred air flow, to prevent dust from dust from TEMPERATURE CONTROL SW ITCH adjust the temperature steplessly high temperature. r lamps (A) light up to display the rom the vents. wer the temperature is.

This switch (4) can be used to between low temperature and The temperature level indicato temperature of the air coming f The more blue lamps on, the lo The color of the indicator lam being pressed. When the temperature reach switch to set the temperature. The settings for each mode ar e retained in memory even when the starting switch is turne However, in the following case When the machine has bee When the battery voltage is When there has been abnor When the fan switch is turne d OFF (the setting is not kept in memory wit h only th e air c onditione If the air conditioner is used in t he FRESH position, the inside of the cab will be pressurized and this will preve nt the entry of dust.

an switch, the more effective the pressurizing becomes. The higher the position of the f an switch, the more effective the pressurizin