Komatsu — CHECK BEFORE STARTING ENGINE, ADJUST

. OPERATION OPERATION CHECK ELECTRIC WIRING WARNING Komatsu distributor. remove such material. 3 - 81 If fuses are frequently blown or if there is a sho rt circuit in th e electri cal wiring, locate the cause and repair or contact your Accumulati on of flammable mat erial (dead leave s, twigs, gras s, etc.) a round the battery may caus e fire, so alwa ys chec k and Keep the to p surface of the batt ery clean and ch eck the breath er hole i n the battery cap. If it is clog ged with dirt or dust, wash cap to clear the brea Check for da mage and wrong c apacity of the f use and any sign of disconnection or short cir cuit in the electric w iring.

Check also f or loose terminals and tighten an y loose part Check the wi ring of the "batter y", "starting mo tor" and "alternator " carefully in Always chec k if there is any ac cumulation of flammable material around the battery, and remove suc h flammable material. Please conta ct your Komatsu distributor for in vestigation and cor rection of CHECKING WITH MACHINE MONITOR (B). ght up for approx. 2 1. Turn star 2. Check th seconds ting switch (1) to t he ON position at all the monitors and gauges li pprox. 2 and the alarm buz zer sounds for approx.

2 s econds REMARK If the lamps d o not light up, there may be a failure or disconnectio in the monito r, please contact your Komatsu distributor. Do not simply use the monitor to carry out the check before starting Always carry o ut the check before starting accordi ng to the procedure o the following p ages.