. OPERATION OPERATION PRECAUTIONS WHEN OPERATING BLADE PRECAUTIONS ON SLOPES IT IS PROHIBITED TO KEEP THE DOOR OPEN DURING OPERATIONS IT IS PROHIBITED TO MODIFY THE CAB GLASS IN ANY WAY THAT WILL OBSTRUCT THE VIEW 3 - 114 METHOD OF USING BLADE LIFT CYLINDER Do n ot carry out bac k grading operations with the c ylinder fully extended. There is h igh risk t hat an excessive load will b e brought to be ar on the cylinder. BE CAREFUL OF FU EL LEVEL If t he fuel level in the fuel tank becomes low whe n the machine is working on slop es, the e ngine may suck in air be no cause of the an gle of the machine or the swayi ng of the machine.
This may mak e the eng ine stop, s o be ca reful t to let the fuel level in the fuel tank become t oo low. achine is more ts up, add fuel W hen working on slopes where the angle of the m th im (A): (B): BE CAREFUL OF OI L LEVEL chine on sloped areas of more than 20°, fill all appropriate components with oil to H level Whe n operating ma chine on sloped areas of more onents with oil to H level PRECAUTIONS WHEN ENGINE STOPS ON SLOPES If the engine stops w hile working or traveling on a h ill, immediately depress the brake pedal to bring the machi ne to a co METHOD OF USING BRAKES the brakes, so avoid such operations.
The following action s cause premature damage to the brakes, so avoid such operat Us ing emergency brake at full speed Us ing brake with engine running at full speed in first gear (F1, R1) (Machine stall conditio REMA RK Alwa ys depress the decelerator pedal to lower the engine speed before actuating th e brakes Alwa ys keep the do or closed when traveling or car If the door is open, t here is danger of damage from Fo r safety reason s, do not install anything on th e cab glass that will obstruct the Al ways keep the glass clean to ensure safety d uring operations.