. OPERATION TROUBLESHOOTING STARTING ENGINE WARNING DISCONNECTING THE BOOSTER CABLE 3 - 145 Always c heck that the wor k equipm ent lock lever an d Parking brake le ver is set to th e LOCK p osition, r egardless of whether the machine is workin g normally or ha s failed . Check al so that all the con trol levers are in the HO LD or NEUTRAL position. 1. Mak e sure t he clips are firm ly connected to the battery term 2. Star t engine of the normal machine and ru n it at high idle s 3. Turn the sta rting switch of t he problem ma chine to the STA RT position and start the engine.
If th e engine doesn 't start a t first, try again after 2 minutes After the engine has started, dis connect the boo ster cables in th e reverse of the order in which the y were connected. 1. Remove the clip of booster cable (B) from e ngine block (E) the problem machine. 2. Remove the clip o f booste terminal of b attery ( D) on th e normal mach 3. Remove the clip o f boost er cable (A) fro terminal of b attery ( D) on th e normal mach 4. Remove the clip o f boost er cable (A) fro terminal of b attery ( C) on th e problem mac 5. Inst all the tr