. MAINTENANCE PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS 4 - 16 PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS ly replace the safety page. For usin g the machine safely f or an extended p eriod of ti me, you are required to periodical (critical and fire prevention) rela ted parts listed in the table of importan t parts on the following page. Material quality of these parts c an change as tim e passes and they ar e likely to we ar out or d eteriorate. However, it is diffic ult to determine the exte nt of wear or det erioration a t the time o f periodic mai ntenance . Hence, it i s required to replac e them with new ones regardless of th eir conditio n after a c ll times.
ertain portant ensure t hat these parts maintai n their full performance at a Furtherm ore, should anything ab normal be found on any of t hese parts, replace it wit h a new on e even if th e periodic replace ment time for the part ha s not yet arrived . If any of the hose clamps show deterioration like deformati on or cracki ng, replace t he clamps at the sa me time as the hose s. form the following checks with hydraulic hoses which need to be replaced periodically. Tighten all loose and replace defective hoses, as required. placing hoses, always replace O-rings, gaskets, and other such parts at the same time. ur Komatsu distributor replace the critical parts.
Also per clamps and replace defective h oses, as required When re placing hoses, always replace O-rings, gaskets, a nd other su ch parts at th e same ti Have yo ur Komatsu distributor r eplace the critic al parts. SAFETY CRITICAL PART S Replace wear parts such as the filter element or air cleaner element at the time of p eriodic m aintenance or before they rea ch the wear limit. The w ear parts should be replace d correctly in order to en sure more economic use of t he machine . When replacing parts , always use Ko matsu gen uine parts. part number may change, so inform your test part number when ordering parts.
As a re sult of our continuous efforts to improv e product quality, the number Komats u distributor of the mach ine serial numbe r and chec k for the la test part num ber when ordering p NO.
Periodic Replacement Parts Q 'ty Replacement Interval 1 Fu el hose (Fuel tank to fuel strainer) 2 1 1 1 1 2 2 1 1 1 Every 2 years or every 1 4000 hours of service meter reading 1 whichever comes earlier 2 2 1 1 1 1 1 1 3 2 Fu el hose (Fuel strainer to hand priming pump) 3 Fu el hose (Hand priming pump to pre-filter) 4 Fu el hose (Pre-filter to feed pump) 5 Fu el hose (supply pump to fuel tank) 6 Fu el hose (Nozzle to fuel tank) Hy 7 as draulic hose between torque converter oil cooler and power train sembly 8 Hy draulic hose between power train pump and power train filter 9 Hy draulic hose between power train filter and branching-off block 10 Hy draulic hose between branching-off block and steering case 11 Hy draulic hose between power train lubrication pump and steering case 12 Po wer train hydraulic pressure sensing hose assembly 13 Hy draulic hose between HSS pump and work equipment valve 14 Hy draulic hose between HSS motor and work equipment valve 15 Hy draulic hose between work equipment valve and hydraulic tank 16 Hy draulic hose between HSS pump and drain relay block (P/L) 17 Hy draulic hose between HSS motor and drain relay block (P/L) 18 Hy draulic hose between cooling fan pump and drain relay block (P/L) 19 Hy draulic hose between drain relay block (P/L) and hydraulic tank Hy 20 de draulic hose between cooling fan pump and self- pressure compression valve Hy 21 fa draulic hose between self- pressure decompression valve and cooling n motor