Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE 1. Stop the engine, wait for the coolant to cool completely, then turn valve (2) of corrosion resistor (1) to the Close stopper position. 4 - 23 2. Turn m ain radiator cap (3 ) slowly, an 3. Prepare a container to cat ch the coola nt, pull out hose (4) of the main ra diator a t the bott om front rig achine, open dr ain valv e (5) and drain the wa Open th e drain valve (6) in the water side of After dr the engine, and d aining, close up d rain the wat rain valve ( water u p to the vicinity of the water fil 6. After th e radiato r is filled with water, s tart the en gine and run it at low id le.

Afte r the wate r temperatu re rises abo ve 90°C (194 ° F), run the engine for ap prox. 10 min utes. Stop th After dr agent. For the