Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE ADJUSTMENT WARNING 4 - 29 CHECK TRACK SHOE TENSION, ADJUST The wear of pins and bush ings on the und ercarriage w ill vary with the working conditions and typ es of soil. It is thus necessar y to continually in spect the trac k tension so as to m aintain the stand ard tension. Carry out the check and adjustment und er the same conditions as becomes clogged with mu d, measure wit h the track c logged with NSPECT ION Stop the machine on level ground (machin e does not m ove for ward even whe n brake is not a pplied), then pu t a straight rod on t op of the carrie r roller and idler as shown in t he diagram on the right.

Check th standard at clearance a between the rod and the grouser is the distance. ard tension dimension a 30 mm 15 mm ck tension is not at the standard value, adjust it in the manner. Stand EX: 20 - PX: 10 - If the tra following manner There is da nger of p lug (1) flyi ng out under the high internal p ressure of the grease. N ever loosen plug (1 ) more than 1 tur Never loo sen any part other mounting direction of plug (1 f the trac k tension cannot b please con tact your Komatsu distributor. WHEN INCREASING TENSIO N Prepare a grease pump. 1. Pum p in grease throug h grease fitting (2) with a g rease p ump. 2.

To ch eck that the corre ct tension has been achiev ed, mov e the mach ine backwards a nd forwards. 3. Chec k the track tensio n again, and if t he tension i s not co rrect, adjus t it again .